Types of Payments Accepted:
For sale is a turn key, 1990 Mazda Miata racecar that needs nothing to race. Car has current NASA log book and meets all safety requirements for NASA, SCCA, WRL, AER, Chumpcar, etc. This car ran a lap time of 2:15.4 at Virginia International Raceway in 2015. . This car won four races in NASA mid Atlantic region in 2015. The car is using over 200lbs of ballast to meet PTE classing rules for it’s power output.
2015 PTE Dyno reclassification – 150Hp @ 2610lbs
Engine Block:
96 1.8L
Wossner 12:1 Pistons 84.5mm (1.9L) tuned for 93 octane pump fuel
SCAT H-beam rods
ACL Bearings- “loose” tolerance.
ARP Main Cap/ Piston Rod Fasteners
Boundary Engineering Stg 1 Oil Pump
Blueprinted/Balanced Crankshaft
Removed/blocked oil piston jets
Cylinder Head:
97 BP4
WEB Camshafts- .350 Lift/228 Duration
SuperTech Valve Springs/Titanium retainers
ARP Head Stud
Cometic MLS HeadGasket .051 thickness
Race Spec Port/Polish
3 Angle Valve back cut
20cc per cylinder removed from dish
Port/Polished Intake Manifold/Throttle Body
Fidanza Adj Camshaft Gears
Gates Blue Silicone Timing Belt
Custom RAM Air, AEM Cone filter.
4-2-1 Exhaust header, Straight exhaust, relocated pipe exit
Moroso -16an Catch Can
Custom Engine to frame torque brace
Electronics:
AEM EMS Series 1 tuned to 10.8-11.2 AFR. (sequential ignition/injection)
AEM Smart Coils x4
AEM UEGO Wideband Oxygen sensor
StreetFire Custom Wires
NGK-R Short strap plugs
Custom Electronic Box
Custom Dash/Control system
Autometer Oil PSI, Water TEMP, Voltometer,Tachometer
Custom Chassis Grounding kit. 6 locations throughout car.
Cooling:
Gates Water Pump
Mishimoto 53mm Radiator
Custom Coolant Reroute
Blocked Heater core ports
Front lower Radiator shroud/belly pan
Front upper radiator shroud
Front Bumper Holes for cooling
Fuel:
Walboro 255LPH Fuel Pump
AeroMotive Hi-Flow Fuel Filter
M-Tuned Dual Feed Fuel Rail
M-Tuned Adj Fuel Pressure Regulator
DeatchWorks 440cc Injectors
-6an SS fuel lines and fittings
Suspension:
Eibach Pro Coilover kit (same as SM)
Bilstein Nur Spec Shocks (same as SM)
Front Upper Strut tower bar
OEM Sway bars and end links
Brakes:
Hawk HT-10 Front pads (1995)
Hawk DTC-60 Rear pads (1990)
1995 Front Rotors and Calipers
Russell SS brake lines
ATE Amber fluid
Bumper NACA ducts/ 3in hose for cooling
Safety/Interior:
Kirkey 70 series containment seat with Cover 15 deg tilt
MiataCage 6pt
G-Force 6 point harness
G-Force Drivers net, GM style release
LongAcre Convex rear view mirror
MOMO wheel/quick release
FIA approved Rip cord extinguisher 2.3L
Seat brace to Cage
DriveLine:
EXEDY 3 puck CarbonCeramic Clutch Kit (Low inertia, 1990)
Fidanza 8lb aluminum flywheel (1990)
MazdaSpeed 4.8 Race Differential
Russell SS clutch line
2005 5spd Transmission (56k)
RLZ weighted shift knob
Wheel/Tire:
Racing Dynamics 15×7 wheels with 205/50R15 Nitto NT01 tires.
Other:
AMB Transponder wired into the car
Harness for CoolSuit
Harness for AEM AQ1 Data Acquisition
Garmin GPS for Telemetry
Sampson Antenna for Radio